Just now, SIGMA has made available two new firmware packages developed for its sd Quattro and sd Quattro H digital cameras, namely versions 1.12 and 1.08, respectively, aimed at shortening the time needed to recognize an SDXC card.
In addition to that, the present update also removes a bug that caused the cameras to freeze after reactivation from LCD Auto Off. This issue was encountered when the Viewfinder Mode or LCD Mode settings were opened from the main menu.
When it comes to installation, save the downloadable .bin file onto a formatted memory card (must be initialized using the camera), insert the memory card into the imaging unit, turn on the sd Quattro, and go to Menu > Setup > Firmware Update.
Afterward, press the Ok button, agree with the upgrade, and wait patiently as the device does its job. During the installation, the camera will reboot once an continue the update process; in case it doesn’t turn back on, press the power button and resume the installation manually.
However, while the upgrade is in progress, make sure not to turn off the camera, remove the battery, open the battery/card cover, or interrupt this process in any way, as this can lead to serious malfunctions. Once completed, the camera will automatically turn off.
That said, download SIGMA sd Quattro Camera Firmware 1.12 or download SIGMA sd Quattro H Camera Firmware 1.08, carefully apply it on your device, and enjoy these new changes, Also, check back with us as often as possible to stay “updated one minute ago.”